200 bauds start-stop regenerator

Authors

  • S. K. DAS Meteorological office, New Delhi
  • K. SUNDARAM Meteorological office, New Delhi
  • K. C. PANT Meteorological office, New Delhi

DOI:

https://doi.org/10.54302/mausam.v33i1.3070

Abstract

Teleprinter signals on long and medium haul land-line and radio circuit get distorted causing delay in exchange of information due to its garbled reception. The authors have designed a simple start-stop regenerator to correct the distortions to the minimum to enable the acceptance of signals by the printing system.

 

The design evolved is simple in its circuitry capable of correcting distortions upto 49 per cent and also can accommodate a speed variation of  ±10 bauds. The regenerator can be used on circuits operating on 50, 75, 100 and 200 bauds speed.

Downloads

Published

01-01-1982

How to Cite

[1]
S. K. DAS, K. SUNDARAM, and K. C. PANT, “200 bauds start-stop regenerator”, MAUSAM, vol. 33, no. 1, pp. 55–58, Jan. 1982.

Issue

Vol. 33 No. 1 (1982): MAUSAM

Section

Shorter Contribution

License

Copyright (c) 2021 MAUSAM

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

All articles published by MAUSAM are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone.

Anyone is free:

  • To Share - to copy, distribute and transmit the work
  • To Remix - to adapt the work.

Under the following conditions:

  • Share - copy and redistribute the material in any medium or format
  • Adapt - remix, transform, and build upon the material for any purpose, even
    commercially.